When we are up to drill in the concrete, they often end up damaging the wall without making the correct holes.
Then, today, we will pass through the processes of how to drill in a concrete wall without committing any error.
Check this method outside; This is the easiest for concrete walls so far!
Method of drilling in concrete wall.
Step 1: Preparing the drill
First, you have to get a hammer drill that can work on the concrete wall for you. In terms of going from the small holes, you can use the regular exercises. But for the toughest works, always trust the hammer drills or rotary hammer.
Then, check the drill’s manual and instruction book to know it correctly. You have to place the adequate drill in this situation. Make sure that the burst that you use should be a high quality high quality drill bit.
Go through all superior drilling bits to drill and then choose one of them. It is a good idea to pick up the masonry bits with carbide tip for this work. Check the length of the bits flutes.
Make sure they are long enough for the holes you plan to drill. After this, you must verify the correct depth for your holes.
Surely there will be a depth control bar or a depth adjustment. Take a look at that. To hang light objects, 1 inch is sufficient, but for heavy duty projects, you may need longer screws.
Step 2: Holding the drill
In this situation, it is already prepared with its exercise. You can start your drilling process if you have enough experience in this field. However, if you are a rookie, you must learn to keep the drill correctly to obtain the correct holes in the concrete walls.
First, hold the drill with your hand, as a weapon holds. Just as you keep your index finger on the gun trigger, keep your index finger in such a situation in the drill. In some drills, there is a separate handle for holding.
If your simulation has one, do it use it. If you do not have it, without worries, take the other hand on the back of the exercise and place it there.
Step 3: Make small holes.
Now that you are ready, you must prepare the wall for the drilling process. Take a pencil and make marks on the wall.
Make sure your marks or points are exactly at the point where the holes are going to drill. Now, it’s time you start drilling by making small holes.
If you have knowledge, you can say that these holes pilot holes. Keep your drill in the points and drill a bit by maintaining low speed. Make sure that the first holes you make are superficial.
Step 4: Turn on the drill
Once you have finished making pilot holes on the concrete wall, your holes are ready to be drilled as a professional!
Some drills include hammer function and if you have one, go for it. Hold the drill at an angle perpendicular to the surface of the wall by keeping the drilling head in the pilot hole.
Start drilling but do not provide strength, whether firm. Slowly, increase the drill speed and provide a bit of force. His grip in the drilling handle must be firm.
Step 5: Taking the perforated
When you will be drilled continuously, there will be concrete dust. You must take them out. For this, all you have to do is remove the machine after using it for a period.
Give the wall 15-20 seconds and the dust will fall. Now, you can put the drill inside again for drilling.
Remove the exercise periodically and give a break when turning it is necessary to better maintain the operation of the machine of the machine.
Step 6: Use of the masonry nail
Even if you are a seasoned perforation user, your holes may not always be perfect. You have to break the obstructions when drilling is not perfect.
If it is not the expected, you have to insert a masonry nail inside the hole. Then you have to hammer him for breaking the concrete. Now, you can reinsert the drill again to drill.
Step 7: Blowing the dust
Eliminating dust from concrete holes will help you strengthen concrete anchors. You have to tighten a tin or compressed air bulb so you can remove the dust from the concrete hole. After this, aspire correctly. Now, you have finished with the perfect holes!
Wrap
However, seeing, the perforation holes on the wall are not also, if you are concerned about how to deepen a concrete wall, these pieces of information will help you do your job!
Do not forget to write to us about how perforates the concrete? What machine do you use? Share it with us.