If you are an enthusiast of gardening or someone who has a lawn at home, you should be familiar with the term lawn cutter. However, if you have just moved to a house that has a lawn and intends to make good use, then it is essential that you know everything about SOD and SOD cutters.
However, if you have just moved to a house that has a lawn and intends to make good use, then it is essential that you know everything about SOD and SOD cutters.
What is the lawn?
The SOD is like a carpet of grass that is presented on the lawn that eventually becomes part of the land in which it is located. The lawn is used by people living in areas where seeds can blow without growing on grass or want their lawn to be used quickly. SOD should be placed directly on a layer of soil. The eliminated grass can be folded and delivered to another person.
What is the role of the SOD cutter?
Before the new SOD is placed on the lawn, the previous turf must be completely removed and thoroughly. The previous grass was so sown in the field, therefore, eliminating it can be a nuisance. This is where the grass cutter comes into play. It will help you eliminate the grass and also the extra layer of dirt. So when the new lawn is milled, it is level at all places. The lawn cutter can also be used to eliminate SOD weeds or overload from the tracks, make the earth detach to plant flowers or new plants, and, finally, eliminate the ground to install a new source or make a pound .
Things to consider while choosing a cutter.
There are different sizes of cutters. The size of the lawn cutter that uses will depend on the type of work you are looking for to be done. For example, for small grass patches, you can use manual cutters. Meanwhile, for a larger lawn or if your lawn has spins and bleeding, you will need the automated walk behind the lawn cutters.
The size of your lawn will also determine if you need a manual or automatic cutter.
The manual cutter is ecological and the automated are gasoline or diesel.
If your grass is very bad, or is working on a lawn that has been abandoned for a long time, you will need an automated cutter.
Will you need to maneuver the cutter while removing the grass or not? The walk turf cutters behind are easy to maneuver, while manual grass cutters are good for square / rectangular lawns.
The width of the cutter will depend on the size of the lawn.
The maintenance cost, the automatic SOD cutter will be a bit more expensive than manual turf cutters.
You would like to rent or buy the lawn cutter. It depends on how often the grass cutter would be using.
Types of SOD cutter
Meanwhile, you can use a shovel to remove the previous lawn as your grandfather did, but it would be enough back pain work.
Why not make things simple for yourself?
Here are four types of SOD cutters.
- A square edge sweep cutter
This square edge sweep cutter is the most basic. It looks like a shovel, but the difference is that it has a shorter asa and has a square shape. It is perfect for you if you have a small grass and is pointing to define the edges of your lawn. The manual SOD cutter is easy to operate, for example, place the grass cutter on the lawn at a particular angle. Once it is found, just pull it up and out.
Pro advice: We suggest you go to the lawn the day before so that the floor loosen things and becomes easy to work on the elimination of the grass.
The manual turf cutter is no noise, does not use gas or diesel, and without maintenance of the engine.
Although, we must warn you! Working with this tool on the big lawns can be difficult and requires a lot of time. The only drawback of this type of SOD cutter is that it will not give you a level lawn, you will have to do it after the elimination.
- Kick Sood Cutter
This SOD cutter is also manual. It has two long mangoes and between them is the crossbar. The blades work in movement of rollers. You can also alter the level of cutters according to your requirements.
The lawn cutter will simply work while kicking the transverse bar on the other side of the ground. This cutter is used to remove long strips that can be rolled once it is removed.
- Automated grass cutters.
Automated grass cutters are used in the agricultural industry. Farmers use automated gas cutters with gas to eliminate the above as possible damage as possible. They should not be used by owners who have a lawn.
- Walk behind the cutters.
These cutters are smaller than automated and are also easier to use than the straight edge cutter. Walk Lawn Cutters are often expensive, therefore, there is the option to rent the equipment I would need. That would be once in a year.
They can go three inches under the surface. Therefore, these SOD cutters will help you eliminate not only the grass, but also the roots, the weed and the unwanted vegetation on your lawn. The best of these sod cutters is that they are easy to move; Therefore, you can cut into curves and delineate you want. The maneuvering power is useful when using the grass cutter in a garden of the modern house that has cemented blocks or designs.
The work efficiently and also saves you a lot of time and work.
Operating the lawn cutter and preparing the ground for it.
Before counteracting with the lawn cutter on your lawn, here are some things you need to do.
- Humidifying the lawn.
It is essential that for a few days before elimination, it hosts its lawn daily. The water will create a soft soil. A too dry floor for too humid will make cutting and removing difficult. Therefore, the previous turf will collapse or be grouped after falling from the roots. The balanced floor will facilitate the elimination of the lawn and help keep the grass at the level.
II Garrison
If your grass is too grown has weeds or involuntary vegetation. Then, before the Saulid, you must trip over your grass and eliminate the most things as you can. The shorter and clean, the grass, the easier it will be to delete it safely in the sections.
III. Marks
If you plan to remove only the grass from a given area, check the area and measure it correctly. To make marks, you can use the chalk or marked formula (used in sports fields).
IV Make eliminations following a pattern
Make marks in the field; You start by pressing the grass cutter on the lawn on one side of the lawn and walks to the other edge of the grass with the lawn cutter. Also, overlapping on the edge of your lawn cutter so that no extra strip of grass is released or lost. Do this until all your lawn is done.
- Small sections are good.
While it may be easy to remove all the grass at once using the ride turf cutter. We suggest you do it in small portions. The reason is that you would have to lift and move the grass to another place. Therefore, the smallest section will be easy to handle. Also cut all the grass at a time can dry the whole roots system of your grass.
Saw. Keep the supported someone alive
You do not have to dispose of the eliminated floor, you can give a friend; The neighbor and you can even sell them (if they are in good condition). However, to make them usable, it is essential to keep them alive. You can do it by stacking each pile of soil in the other. Also, you have to water the strips eliminated by the water dew from time to time.
VII Protection
Before starting to cut the lawn with the cutter, you must have your protective goggles. The grass and the ground tend to fly in each direction that is being cut. Therefore, it is to prevent particles from going in your eyes. Make sure there are no pets or children when you start the project. Lawn cutters are sharp, therefore, it would be a good idea to wear protective shoes when you are doing the job.
Conclution
Once you have eliminated the lawn with the help of SOD cutters, you must place the new lawn within 48 hours. You can get the new lawn of a nursery in your area. The SOD price will depend on the type of SOD purchased or is available. If you install the SOD yourself, you will save the cost of labor, however, the work can be quite tedious and requires a lot of time.
You would be doing landscaping once at the best year; Therefore, we suggest hiring professional grass cutters instead of yourself.